Basic Info.
Product Description
Overview
This suit are contained with five unit tanks,the three units at the bottom is an entirety, the two units at the top is an entirety.The top and bottom parts could be disassemble, assemble and transport,Every unit is equipped with unique open and close action system, vent circulation system, temperature controlling and heating system , Photoelectric sensor system and Over temperature protection.
Performance indicators and every system constitution
Item | Introduction |
Product Name | Automative forming and baking oven |
Type | JY-8805 |
Sampling Restriction | The equipment is prohibit the test of flammable,explosive and volatile sampling materials,the test of storing the corrosive sampling materials,the test of storing the livings,the test of storing Strong electromagnetic emission source sampling materials. |
Capacity,weight and dimension |
Nominal inside content | 900L×5 floors |
Effective size inside | 800×750×1500(mm)(Two floors) W×H×D |
Carton size | About 1700×5000×1850(mm) W×H×D Structure details refer to sketch drawing |
Weight | About 1000Kg |
Noise | ≤70db The measure distance from the machine is 1 m and from the ground is 1.2 m in front |
Test standard and method | GBT 11158-2008 The technical conditions of high temperature test box GB/T 2423.2-2001 Test B:High temperature test means GBT 2423.2-2008 Environmental test of electric and electronic products The second part:Test means Teat B:High temperature Verification means of basic parameters of environmental test equipment of electric and electronic products. |
The machine performance |
Temperature range | 80→85ºC |
temperature rising rate | RT→85ºC<=40min(without load) |
Loading rate | RT→85ºC<=80min(with load) |
Precision control | Temperature deviation:±2ºC Temperature uniformity:Pick up five points and measure Temperature deviation <±2ºC(The select point refer to GBT 11158-2008 criterion) Temperature fluctuation:±0.5ºC Temperature resolution:0.1ºC |
Machine power | AC 380V 50 HZ 30 KW ,Maximum current 45A The maximum power on the stage of machine rising is 10KW,The power on the stage of constant temperature(85ºC)≤12KW |
Surface temperature | The machine temperature is 80ºC when using for a long time,The surface temperature<45ºC,The required environment temperature≤30ºC,except the connection of door cracks,test jacks and vent jacks. |
The machine bearing | The bottom of the machine bearing≥1000kg/m2mean distribution |
Power supply condition and power source | AC380V Three phase and four wire + Earth protection The range of voltage fluctuation:±10% V The range of frequency fluctuation:(50±0.5)HZ TN-S method power supply or TT method power supply The grounding resistance of earth protection wire <4Ω Requiring the user to equipping the corresponding capacity air or power switch on the fixing scene and the switch must be unique for the usage of the machine |
Environmental test conditions | Environmental temperature ≤45ºC,relative humity≤85%R.H,without test samples in test box. |
Structural features |
Box structure | The test box containes five inner boxes up and down,independent cavity,five floor full automatic door.The four floors on the below is opened from down to up,The top floor is opened from up to down,you can only open one door every time,the other one can be opened when the former is closed. .The outer wall material:Cold rolled steel sheet dealed with lacquer baking,color provided by the customers' swatches,The thickness of steel plate is 1.2mm; .The lining material:Using SUS304# stainless steel t1.0mm to manufacture; .Body heat preservation material:The insulation medium is glass fiber cotton ; The.test box and the control box is an entirety,two floors up and three floors down;Hoisting docking through special up and down butting process, butting convenient. The machine controller installed machine ,the machine is on the position around 1.7 m from the ground.The machine equipped with exhaust fan which could Force convection cooling.(the Into and the outlet wind vent is provided by customers) |
Box door | Automatic door,the four floors on the below is opened from down to up,the top floor is opened from up to down. |
Air conditioning channel | The inside circulating motor power supply generate air circulation,Heat from inside the duct through outlet regulating back Ye Chuang evenly distributed to the interior space, so as to achieve the indoor temperature is uniformly distributed, according to the air circulation, special air duct design cycle |
Air circulation method | The wind circulation method of the machine is from left to right,the heating device and the circulation fan is below in the junction box . |
Test leads' hole | Install according to the plug wire hole |
The control panel | 7 inch touch screen controller, overtemperature protection, abrupt stop button switch Alarm switch, control the total power switch, buzzer alarm |
The inside box structure | Heating pipe, air circulation channel, circulation fan, indoor sensor overtemperature protection, wind deflector |
Power distribution control cabinet | Total power supply circuit breaker, controller, switchboard, cooling fan, adjustable overtemperature protection device |
The power cord hole | Located in the back of the electric cabinet |
The machine appearance | Our company would perform in accordance with the requirements of your design to strictly |
The means of transportation | Layered transportation up and down, docking after arriving at the scene |
Electrical control system |
The man-machine interface | Display control 7 inch TFT true color LED LCD touch screen interface (65535 anthentic color,resolution 800*480) |
PLC controller method | 1,With manual control and automatic temperature control in two methods(Manual mode for debugging) 2,The automatic control process diagram :according to the attachment. |
Temperature module | Delta temperature acquisition module,fast temperature variety control, with a variety of temperature signal input and output selection. |
Operation mode | automatic or manual methods |
Setting method | Chinese interface ,Touch type input |
The Setting range | The upper and lower limits of maximum temperature range±5 ºC |
Display resolution | Temperature:0.01ºC;Time: 1min; |
Power off memory function | Power can be set recovery mode is: the hot/cold/stop; Maximum power memory time is 3 years |
Input | K model thermocouple. |
Circulation fan | Low noise centrifugal fan with multi-wings |
The heater | Import nickel chromium alloy electric heater The heater control mode :Non-contact point Isometric cycle pulse width modulation ,SSR(Solid state relay) |
The control method | Resistance to saturate integration PID,BTC Equilibrium temperature control method (Temperature testing equipment) |
Safety protection device |
Test chamber | Adjustable overtemperature protection Air conditioning channel adjust the overtemperature to the limits |
Circulation fan | Overload and short circuit protection |
Power supply | Lack of phase/reverse phase protection, short circuit protection, overload protection |
Heating device | The over limit temperature protection, short circuit protection |
If you have new requirements, please contact the technical section,Senior engineer to provide you with the most authoritative product testing scheme
Q1:Is your company a trading one or a factory?
A1:Our factory produces goods directly. We have focused on the development and manufacturing of physical and environmental testing equipments for 18 years,besides,we have export experience of six years.
Q2:What about the quality of services and products?
A2:Berore shipping and delivering the goods,each product must be tested and tested for 100% .
Products using training: we would provide a training video of each product in order to show you how to install and operate.
All products meet the standsrds of ISO, ASTM, AATCC, BS, EN, DIN, JIS, GB and other requirements.Q3:How long is the delivery time?A3:Usually about 15 to 25 days.If we have stock, we can arrange the shipment within 3 days.
Kindly note that our producing and delivery time depend on specific item and the number of it.
except for the special customization.
Q4:Distance transportation, the packaging is strong enough?
A4:Packing: the first layer uses bubble film ,and the second layer uses vacuum film.We take away the air so as to make a vacuum environment after packing,which can avoid the problem of rust on the rough sea,and the outer packing using standard wooden cases.
Q5: What is the mode of payment?
A5: Generally we use telegraphic transfer,inculding 50% deposit and 50% before shipment.Other payment methods can be negotiated.
Q7:How warranties and after-sales services?
A7:Our products have 18-month warranty.
Life-long free technical support, be video through email.Besides, we can help you to repair your problem controller , even it's not from our factory Produce.
What you need to do is to send us the controller.
Outside the warranty period, professional after-sales service team will provide the perfect technical support, and help customers to solve problems when using our products, deal with guest problems and complaints, and in a professional and timely.
Commitment:
Though we sign a contract, we will also sign a letter of commitment, which will increase your confidence in us.
Address:
Dn-32, Dn-33, Jingshan Third Industrial Zone, Chashan Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Instruments & Meters, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
JunYuan mechanical equipment Co., Ltd. Belong to chun yen(OTS) company, which is Taiwan brand. Manufacturer In Dongguan. Taiwan Technology. High-end products, founded in 1998. Our company collection of r &d, production and sales in the integration of international high-tech enterprise, testing instruments and equipment directly manufacturer, the main products: Thermal shock chamber, Temperature & Humidity chamber., tensile testing machine, compressive strength testing machine, digital tensile testing machine, etc.
Our company uphold the "quality of service first, integrity-based" business philosophy, successfully developed belongs to JunYuan company own brand. Dedicated to the world standard: ISO, ASTM, DIN, EN, BS, JIS, GB, ANSI, UL, TAPPI, AATCC, IEC, VDE...All used. International level quality synchronization competition with the advanced world trade; Product innovation, technology outstanding!
Our head office is located in Taiwan, China production base is in DongGuan, factory building area of 10000 square meters. Our products with their accuracy and reliability are chosen by the majority of industry and scientific research institutions. Welcome to visit our factory! Company goal: To become the leading world and high trust test equipment supplier!